TECHNICAL DATA & INFORMATION - Click to view complete technical data
- Electrically insulative, epoxy, potting compound
- Low-shrinkage/mass castable
- High chemical resistance
- Operating temperature up to 240°C
PRODUCT DESCRIPTION
APTEK 6113-A/B is a black, rigid, tough, two component, mineral-filled, electrically insulative, low-shrinkage epoxy system specifically designed for the potting of larger electrical units like motor stators and transformers.
When properly mixed, handled, and cured APTEK 6113-A/B will withstand wide temperature range excursions with a minimal tendency to crack, distort, or impart stress to wires/components.
KEY FEATURES AND BENEFITS
- Very good high heat resistance to 240°C; capable to withstand excursions up to 280°C with minimum degradation in long term operation.
- Low shrinkage – imparts minimum stress to electrical units during gelation when properly cured.
- Excellent chemical resistance even at high temperatures – especially effective in hot oils.
- Displays excellent temperature cycle resistance to minimize the chance of cracking during the life time of the part.
- Excellent adhesion to most metal and plastic substrates – no primer required.
- Pre-measured kit eliminates weighing for convenience.